News

When laying interlocking floor tiles, you have two main pattern options: T-joint (brick pattern) and X-joint (grid pattern). The choice affects both the look and performance of your floor. T-Joint (Brick Pattern) In a T-joint layout, each row is offset by half a tile — like the bricks in a wall. This means no four corners ever meet at the same point, creating a staggered pattern. ✅ Advantages: Stronger floor — weight is distributed across more connection points Better for heavy traffic and vehicle use Less likely to lift at corners under load Recommended for garages, workshops, and industrial spaces X-Joint (Grid Pattern) In an X-joint layout, tiles align in a perfect grid — four corners meet at every intersection. This creates clean, uniform lines across your floor. ✅ Advantages: Cleaner, more symmetrical visual appearance Easier and faster to install (no offset calculations) Ideal for showrooms, retail, and lighter-use areas Works well with multi-colour designs and patterns Our Recommendation For most garages and workshops, we recommend the T-joint (brick) pattern. It creates a stronger, more stable floor that performs better under heavy loads and vehicle traffic. The offset pattern also looks great and gives your garage a professional, finished appearance. For showrooms, retail spaces, or decorative applications where heavy loads aren't a concern, the X-joint (grid) pattern offers a sleek, modern look. Shop Our Tiles

Installing interlocking PVC garage floor tiles is one of the easiest home improvement projects you can tackle. Here's our step-by-step guide to getting a professional result every time. Before You Start Our interlocking tiles can be installed over any hard, flat surface — concrete, screed, existing vinyl, or even painted floors. The subfloor doesn't need to be perfect; our tiles accommodate minor imperfections up to 3mm. You'll need: Tape measure, rubber mallet (optional), Stanley knife or jigsaw, straight edge, and a clean broom. Step 1: Clean & Prepare Give the floor a thorough sweep to remove dust, debris, and loose material. If there are any significant bumps or protruding nails, knock them flat. You don't need to degrease or treat the surface — the tiles sit on top without adhesive. Step 2: Measure & Plan Measure your garage and calculate how many tiles you need. Our tiles are 500mm x 500mm (0.25m² each). Add 5% extra for cuts and waste. Plan your layout from the most visible point — usually the garage door — working backwards. Step 3: Start Laying Place your first tile in the corner with the interlocking lugs facing away from the walls. Leave a 5mm expansion gap between the tiles and walls. Press the next tile's loops over the lugs until you hear a satisfying click. That's it — no glue, no tools. Step 4: Build Row by Row Continue clicking tiles together row by row. For a T-joint (brick) pattern, offset each row by half a tile — this creates a stronger floor. For an X-joint (grid) pattern, align tiles in a uniform grid for a clean, symmetrical look. Step 5: Cutting Edge Tiles For edges, measure the gap, mark the tile, and cut with a Stanley knife and straight edge (7mm tiles) or jigsaw (10mm tiles). PVC cuts cleanly and easily. Step 6: Finish with Ramp Edges Click ramp edges onto any exposed tile edges at doorways and transitions. These provide a smooth, trip-free slope and a professional finish. ⏱️ How Long Will It Take? Single garage (15m²): 2–3 hours | Double garage (30m²): 4–5 hours | Large workshop (50m²+): 6–8 hours Pro Tips Let tiles acclimatise indoors for 24 hours if your garage is heated Work with a partner for large areas — one person clicks, one carries A rubber mallet helps in cold weather when PVC is slightly stiffer Take a photo of your finished floor — you'll want to show it off! Shop Floor Tiles Shop Ramp Edges